GHOST FIRE UR-1000 Rechargeable Guitar Pedal Power Supply – 9V/12V/18V Isolated Outputs, Built-in Lithium Battery, Short Circuit Protection, Lifetime Warranty

1. Initial Setup & Charging

• Connect the included 12V/3A power adapter to the INPUT port to charge the built-in lithium battery.

• LED Indicator  shows charging status (e.g., solid green = fully charged).

2. Power On/Off

• Toggle the Main Switch to turn the device on/off.

3. Connecting 9V Pedals (Outputs 1-7)

• Use Outputs 1-5 :

  • 9V/300mA each – Ideal for low-current pedals (e.g., tuners, buffers).

• Use Outputs 6-7 :

  • 9V/500mA each – Suitable for higher-demand pedals (e.g., digital delays).

• LED Indicators: Green = active; Red = overload (disconnect pedal to auto-reset in ~2 sec).

4. Adjustable Output 8 

• Voltage Selector: Switch between:

  • 9V/500mA | 12V/375mA | 18V/250mA.

• Compatibility: Versatile for pedals requiring higher voltages (e.g., EHX Pitch Fork).

5. High-Power Output 9 (Non-Isolated)

• Voltage Selector: Supports:

  • 9V/2A | 12V/1.5A | 18V/1A.

• Use Case: Power-hungry devices (e.g., multi-effects units, modelers).

6. Safety & Troubleshooting

• Overload Protection: Faulty connections trigger red LED; auto-recovery after ~2 seconds.

7. Power Down

• Press the Main Switch to turn off the device.